|
|
Blower motor speed selection
troubleshoot
• 1983 - 2005 FORD RANGER
• 2002 - 2005 ford explorer
Have you experienced an issue with the blower motor speed selection on a 1983-2005 Ford Ranger or 2002-2005 Ford Explorer? The most likely problem is the blower motor resistor has failed and will require replacement. Another common problem is that the electrical connector to the blower motor resistor may have a short causing the socket connection to melt.
The 1712270 is a replacement electrical connector that can be used to replace the burnt socket. Using the information below, you can cut out the old electrical connector and crimp this in its place.
|
The 1711725 directly fits the front blower resistor both the manual and the automatic air conditioning systems. It has a two hole mount.
|
| 55_have_you_ever_experienced_an_issue_with_the_blower_motor_speed_selection__ford_ranger_83-05_.pdf |
"Your Simple A/C Solution"
globalpartsdist.com
Manufacturer names, logos and part numbers are for reference only. Documents and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. Note that any views or opinions presented in this document are solely those of the author. Any unauthorized review, use, disclosure or distribution is prohibited. gpd accepts no liability for any damage caused by any virus or other means transmitted by this document.
Manufacturer names, logos and part numbers are for reference only. Documents and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. Note that any views or opinions presented in this document are solely those of the author. Any unauthorized review, use, disclosure or distribution is prohibited. gpd accepts no liability for any damage caused by any virus or other means transmitted by this document.
© COPYRIGHT 2018. ALL RIGHTS RESERVED.