global parts distributors, llc
  • Home
  • Tech Tip Search
  • Videos
  • Sales Flyers
  • Contact Us
En Espanol
En Fraincais

​2000-2007 Mercury Sable & Ford Taurus
4811269 Liquid Line

Tools Needed:
 19 mm Wrench
 22 mm Wrench
 gpd #8011234 Mineral Oil (NOT to be used in compressor!)
ALWAYS USE EYE PROTECTION​
Picture
1. Locate female nut and male threaded fitting ends of the hoses.
 
Picture
2. Remove plastic covers. Female end will have an orifice tube (gpd
     #3411250) inside, and female end will have an o-ring. Lubricate  o-ring with mineral oil.
 


Picture
3. Press male and female ends together and hand tighten nut on to thread.
 

 


Picture
4. Tighten with wrench (19mm & 22mm) to approximately 16.2 ft pounds (24nm).
 
​
 



Picture
71_ford_taurus_mercury_sable_liquid_line_4811269.pdf
File Size: 191 kb
File Type: pdf
Download File

Picture

"Your Simple A/C Solution"

globalpartsdist.com
Manufacturer names, logos and part numbers are for reference only. Documents and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. Note that any views or opinions presented in this document are solely those of the author. Any unauthorized review, use, disclosure or distribution is prohibited. gpd accepts no liability for any damage caused by any virus or other means transmitted by this document
​.​


© COPYRIGHT 2018. ALL RIGHTS RESERVED.
  • Home
  • Tech Tip Search
  • Videos
  • Sales Flyers
  • Contact Us
UA-83582867-1