How to install/remove a compressor switch
tools needed
5811254 • Snap Ring Pliers
|
Safety First! Always Use Eye Protection
|
5811423 • Switch Puller Tool
|
how to install a compressor switch
|
1. Loosen the manifold plate to release the pressure.(***Always wear safety glasses!***)
2. Insert switch into the switch installation tool.
|
|
|
3. Place switch into switch port and press firmly.
|
4. Insert snap ring and press around the edges. Ensure that the snap ring seats correctly into the switch port. (Use caution when installing snap ring.)
|
5. Always check the label on the side of the compressor for the correct amount of oil needed in the compressor. Check the oil using the drain plug on the side of the compressor.
|
How to remove compressor switch
|
1. Loosen the manifold plate to release the pressure. (Always wear safety glasses!)
|
|
|
4. Pry up on the plug to remove.
|
5. Remove and discard compressor switch blank.
|
|
|
Click "Download File" for the PDF version.
| gpd_tech_tip_35-compressor-switch_install_remove-how_to.pdf |
