OIL LEVEL CHECK:
DENSO 7SBH17C STYLE COMPRESSORS
|
PLEASE NOTE: All gpd 65 series compressors are equipped with the correct amount of oil.* To verify the quantity of oil inside the compressor, refer to the tag attached to the gpd compressor. *Unless otherwise noted. |
The oil drain plug on the Denso 7SBH17C style compressors is located in a different position than traditional compressors. To check the oil level on these compressors, take out the oil plug bolt and empty the oil into a measuring device. Due to the internal design of this compressor, completely draining the oil will take a fair amount of time
Facing the compressor clutch forward, the oil plug is located near the top front of the compressor mount for the following gpd compressors:
#6512943, #6512991, #6513062, #6513116, #6513130, #6513131, #6513144, #6513187, #6513192, #6513241, #6512992, and #6512997.
#6512943, #6512991, #6513062, #6513116, #6513130, #6513131, #6513144, #6513187, #6513192, #6513241, #6512992, and #6512997.
|
|
|
|
The oil plug on gpd compressor #6512795 is located on the front of the body, near the clutch.
|
Facing the compressor clutch forward, the oil plug is located near the top front of the compressor mount on gpd compressor #6513151.
|
Facing the rear of the compressor, the oil plug is located on the left side of the body, near the front clutch, under the front mount on gpd compressor #6513163.
|
|
|
| gpd_tech_tip_121-compressor-denso_7sbh17c_oil_plug_location-quick_reference.pdf |
|
|
| ||||||||||||||||||||||||||||||
