A/C Service tips for 2007-2009 mitsubishi outlander 3.0 v6 gas engine

2007-2009 Mitsubishi Outlander A/C systems feature a scroll style compressor. As described in gpd Tech Tip #36, “Piston Replacement Compressors”, the scroll design is known to underperform at low RPMs and does not tolerate excess debris well on select applications.

​It is best practice to properly flush the system and replace the condenser and hoses when replacing the compressor, especially after a catastrophic failure. Any contaminants/debris left in the system from the failed compressor can create a restriction in the condenser, causing high head pressure and premature failure of the new compressor.

​For a hassle-free A/C service, gpd highly recommends the following when replacing gpd compressor 7513369 on a 2007-2009 Mitsubishi Outlander 3.0 V6 Gas Engine:

1. Flush system completely*
2. Replace the condenser*
3. Replace the suction and discharge lines
4. Replace accumulator
5. Replace orifice tube
6. Replace all seals and o-ring

Failure to replace the above items may lead to premature failure and void warranty.
​
*Note: Parallel flow style condensers cannot be flushed. They must be replaced (Refer to gpd Tech Tip #1)

7513369 • Scroll • 6 Groove
(With or without rear A/C)

---

Compressor Kits, Kits+, and System Service Kits available

---

---

---

Click "Download File" for the PDF version.

gpd_tech_tip_237-service-tips-for-mitsubishi_outlander_3.0.pdf
File Size:	166 kb
File Type:	pdf

Download File

---