|
|
Clutch Coil Harness Connection on Early Model Compressors: 6512102 & 6512103
|
Early designs of gpd compressors 6512102 and 6512103 for the applications listed below may require the OEM clutch coil wire harness. Late model designs of these gpd compressors are equipped with the wire harness.
6512102
6512103
|
6512102 (Late model design with wire harness)
6512103 (Late model design with wire harness)
|
If the gpd compressor, 6512102 or 6512103, on hand does not feature the clutch coil harness circled on the late model designs pictured above, it is an early model design and will require the OEM clutch coil wire harness for installation.
How to Remove and Install OEM Clutch Coil Wire Harness on Early Designs of 6512102/6512103:
|
1. Unplug the OE clutch coil harness connection. 2. Remove screw and bracket from OE compressor. 3. Remove screw and bracket from gpd compressor. 4. Plug OE harness from old compressor into new gpd compressor plug. 5. Properly ground harness to gpd compressor as shown. |
|
Click "Download File" for the PDF version.
| Tech Tip #14 Early Model 6512102 and 6512103.pdf |
